Advantages:Water Filtration Life System Reverse Osmosis For Commercial Use
1) Our company's RO reverse osmosis equipment adopts key components, equipment adopts International brand.
2) advanced technology, reliable quality, strong expandability, reasonable structure and small area.
3) high water utilization rate, low energy consumption, fully automated operation, simple operation and maintenance.
4) According to user requirements design and manufacture of reverse osmosis system.
5) The general production limit of 0.25m3/hr, the upper limit is not limited, the water recovery rate can reach more than 75%, salt rejection > 98%.
6) The amount of water produced varies with the temperature of the incoming water and the aging or contamination of the reverse osmosis membrane.
Water source:Water Filtration Life System Reverse Osmosis For Commercial Use
There are many reverse osmosis membrane materials, including various organic polymer materials and inorganic materials. At present, the commonly used membranes in industry are mainly cellulose acetate membrane (CA) and aromatic polyamide membrane (PA) and composite membrane.
During the operation of the system, the surface of the reverse osmosis membrane will be polluted by the deposition of heavy metal hydroxide produced by the presence of subfine particles, colloids, organic matter, microorganisms and other pollutants in the raw water and the multiple concentration of heavy metal hydroxide during the operation. When the reverse osmosis membrane is contaminated, the system water production decreases and the desalination rate decreases. Therefore, the system needs to be automatically backwash regularly, and the remaining concentrated water in the membrane element is washed off to remove the pollutants on the surface of the reverse osmosis membrane, prevent the concentrated water from being deposited on the surface of the reverse osmosis membrane and prolong the service life of the membrane; in addition, regular chemical cleaning is needed to restore the excellent properties of the membrane, and sometimes aseptic treatment is needed.
3. sterilization:
Ultraviolet sterilization: UV sterilization has two ways of pipeline irradiation and water tank irradiation.
DNA structures in the cells are destroyed when various bacteria, viruses, parasites, algae and other pathogens in water (air or solid surfaces) are subjected to a certain amount of ultraviolet radiation, thus killing bacteria, viruses, and other pathogens in water without the use of any chemical drugs for disinfection and purification purposes.
Ozone sterilization: Ozone is a light blue gas with a slightly special fresh odor at room temperature.
The germicidal principle of ozone is that ozone destroys the cell membrane of bacteria with its powerful oxidation ability, thus killing it. Ozone has killing effect on most bacteria, especially on common coliform, mold, staphylococci and fungi, which are harmful to human health. Ozone has far more bactericidal effect than chemical disinfectants: chemical disinfectants often leave residual contamination after use, and ozone can automatically decompose and reduce to oxygen;
Ozone sterilization effect is also stronger than ultraviolet: ultraviolet light wave sterilization, irradiation can not sterilize, and ozone as a gas, no sanitary dead corner, gas everywhere, sterilization effect is very strong.
Because ozone is extremely unstable and easy to decompose, it needs to be manufactured on site. A set of ozone generator includes aerator, oxygen generator, ozone generator.
Product Index:Stainless Steel Reverse Osmosis Ro System Water Filter
FAQ:Water Filtration Life System Reverse Osmosis For Commercial Use
1. Q: Which machine should I choose?
A: It depends on your raw water quality and your requirements for permeate water.
Usually there are three parts: pretreatment, RO machine, and post treatment. Pretreatment could be UF(ultra filtration) system, anti-scale dosing system, flocculant dosing system, disinfectant dosing system, water softener, sand filter, carbon filter, security filter etc. Post treatment could be UV sterilizer, Ozonizer, ClO2 sterilizer, etc. And maybe you need an EDI system. We will choose proper process according to your raw water quality and permeate water purpose.
2. Q: What’s your machine material?
A: For pretreatment tanks, we usually use FRP or S.S. The RO frame could be S.S, carbon steel.For pipes, it is usually S.S and UPVC. We can choose material according to your special requirements.
3. Q: What’s the control method?
A: For pretreatment, you can choose manual or automatic; for the whole system, we use relay, PLC or man-machine interface remote control.
4. Q: Which spare parts need to change regularly?
A: Filter cartridge in the security filter and RO membranes. For filter cartridge, it needs to change each 3-6 months, and for RO membrane, you need to change each 1-3 years. It depends on your water quality and how you maintain the machine.
5. Q: What’s your warranty?
A: Our warranty is 1 year. But to our experience, our machine can work 5 years before repair.
6. Q: Do you provide installation and training?
A: Yes, we can send our technician to your site for installation or training. Or you can send your staff to our factory for training.
7. Q: What’s your electricity requirement?
A: Our machine could be 380V/220V/110V, 50HZ/60HZ, 3 phase/single phase. We can do customer made products.
8. Q: What’s your machine size?
A: It depends on the capacity requirement and we can make changes according to your space.
9. Q: What’s the purchase procedure?
A:Customer send Inquiry -----we provide solution and quotation-----customer confirm and place order-----we send PI-----customer make first payment----we arrange production----customer make the rest payment-----we ship goods from our factory.
